Description：
In contrast to the DC motor, a photoelectric encoder is added into the encoder motor for detecting speed which is fed back to the signal input terminal for PID control to implement servo control for the motor.
Features:
- Control the speed and displacement for the motor precisely;
- Users can customize their own PID parameter by self-contained software;
- It provides overload protection.
| Specification | |
| Actuators conditions | |
| Rated voltage | 6.0V (DC) |
| Temperature range | -20℃~+60℃ |
| Humidity range | 0%-90% |
| No-load characteristics | |
| No-load current | ≦ 200 mA |
| No-load speed | 185±10% rpm |
| Load characteristics | |
| Rated load | 0.9 Kgf.cm |
| Rated current | ≦ 550mA |
| Rated speed | 135±10% rpm |
| Starting torque | 4.5kgf.cm |
| Locked-rotor current | ≥ 2.0 A |
Size Chart:
Height/Width/Length: 200 x 140 x 30mm (7.9 x 5.5 x1.2inch)
Part List:
1 x Me Encoder Motor Driver
2 x Optical Encoder Motor-25 6V/186RPM
2 x Encoder Motor Wire
Warning:
Before using, please make sure there is enough distance between the white sensor and the black coding disk as below picture for the white sensor may be damaged by the rotating part.